1. When pressing the molded melamine door, it should be as low as possible and for a short time to avoid damaging the internal structure of the high-density board in the door panel.
2. Maintenance of melamine doors: The pressed melamine doors should be shaped and shaped, and then maintained at constant humidity for 1 week to completely release the stress in the board in front of the combined door.

3. Door stop structure combination: The melamine door needs to be made of flat-pressed 25mm multi-layer boards, cut into 30mm strips, and two erected on the sides.
4. It takes a long time to cold-press the melamine door molding embryo, and the pressure can be released after the glue is completely solidified. It's best to use a fast-setting glue.
5. Melamine doors should be placed vertically or horizontally when stored, and the squares must be horizontal.
