Wood Identification Currently, the market trend for high-end wooden doors focuses on varieties such as black walnut, teak, cherry, maple, and beech. Because these types of solid wood are expensive, some manufacturers choose lower-grade woods with similar grain patterns and use dyeing techniques to pass them off as high-grade woods, deceiving consumers. Below are some simple methods for identifying wood types.
1. Black walnut and cherry wood have irregular, mountain-shaped grain patterns. Cherry wood will have irregular black resin lines in its grain. In the market, some manufacturers dye oak or ash to pass them off as black walnut; some dye birch (which does not have black resin lines) to pass them off as cherry; and some use engineered wood (paper-based) to pass them off as teak, but engineered wood lacks the oiliness of teak.
2. Maple is light yellow in color with small mountain-shaped grain patterns. Its most distinctive feature is its shadow effect (visible localized luster), classifying it as a mid-range wood.
3. Beech is bright light yellow in color with dense medullary rays. Imported beech has fewer defects and is much better than domestic beech. Imported beech is considered a mid-to-high-end wood in China. Consumers should pay special attention when choosing these types of wood. They should choose reputable and established brands with strong processing capabilities. These brands use genuine materials, employ meticulous craftsmanship, and generally control the moisture content of the wood to around 10%. They also offer after-sales service guarantees. Consumers can check the product description to see if the brand is a nationally registered trademark (marked with an ® symbol) and if there is factory authorization. The fineness of the product's processing also reflects the factory's craftsmanship level.
Paint
1. Observe and feel the fullness of the paint film. This requires comparing several times to become discerning. A full paint film indicates good paint quality, strong adhesion, and good sealing of the wood. It also suggests a thorough painting process and no suspicion of cutting corners.
2. Stand at an angle to the door (as shown in the decoration rendering) to find the reflective angle of the surface. Check if the paint film is smooth, if there is obvious orange peel effect, and if there are any small raised particles. 3. If the orange peel effect is obvious, it indicates that the paint film baking process is substandard.
4. For doors with decorative designs, check the edges of the lines that create the design, especially the inside corners (the corners you can see but can't touch), for any cracks in the paint film.
5. Ask about the type of paint. The most common answer is PU paint (polyurethane paint). Note that the advantages of PU paint are easy sanding and quick, labor-saving processing. The disadvantage is that the paint film is soft, and even minor bumps can easily cause white marks and dents. If at least one layer of PE paint is used, this possibility is greatly reduced. The advantages of PE paint (polyester paint) are a hard paint film, strong coverage, good transparency, and better display of wood veneer texture. The disadvantage is that it is difficult to sand and the processing is time-consuming and labor-intensive; most manufacturers are unwilling to use PE coatings.
Pure PE paint has the advantages of a hard film, strong coverage, good transparency, and can better show the wood veneer texture. The disadvantage is that it is difficult to sand and the processing is time-consuming and labor-intensive; most manufacturers are unwilling to use PE coatings. Surface Smoothness
1. Bubbling of the veneer indicates uneven heating or uneven glue application during the veneer application process. A flatbed hot press can solve the problem of uneven heating when applying veneer to flat doors.
2. Insufficient surface smoothness of the wooden door indicates the use of cheaper boards. If the boards lack smoothness, their environmental performance is unlikely to meet standards. This is a case of "a leaf falling indicates the whole autumn."
3. Check if the seams are even and fine: This is similar to selecting a car, directly reflecting the company's overall craftsmanship level.
4. Check the installation quality: Although finished door sets are manufactured in the factory, they are only considered complete when they are delivered to the customer. Therefore, the door is only a semi-finished product after leaving the factory; installation is the crucial step. A good installation process, good installation tools, and experienced installation technicians are key to successful installation;
5. Check the hardware: Finally, let's talk about hardware. Hardware is an area where wooden door manufacturers and customers can easily argue about the quality of the doors. It is recommended that customers try not to purchase hardware parts separately. If the manufacturer cannot provide satisfactory hardware products, you must choose hardware products from well-known brands. Such products usually come with a lifetime warranty.
